Development of the Base Station Controller and Manager in the CDMA Mobile System

The base station (BS) in the CDMA Mobile System (CMS) connects calls through the radio interface and is designed to provide mobile subscribers with high quality service in spite of mobile subscribers’ motions. The BS consists of multiple base station transceiver subsystems (BTSs), a base station controller (BSC) and a base station manager (BSM). This paper is concerned with the BSC and the BSM. The BSC is located between the BTSs and the mobile switching center (MSC) connected with the public network, and is responsible for controlling mobile calls from and to mobile subscribers via the BTSs. The BSM provides operator-interfaces per the BS and takes responsibility of operation and maintenance (OAM) of the BS. Design of the BSC is based on two module types: functional module and unit module. The functional module is used to support new services easily and the unit module to increase the system capacity economically. Both modular types are easily achieved by inserting the corresponding modules to the system. Particularly, in order to efficiently support the soft handover which is one of CDMA superior advantages, the BSC adopts a large high-speed packet switch connecting up to 512 BTSs, and thus mobile subscribers can be provided with soft handover in high probability. The BSM is based on a commercial workstation to support OAM functions efficiently and guarantee high reliability of the functions. The BSM uses graphical user interface (GUI) for efficient OAM functions of the BS.     

Electrophoretic Identification of Muscle Proteins in 7 Puffer Species

ABSTRACT: Species identification of puffer species using sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) with Coomassie blue and Coomassie blue/silver double staining was performed. A comparison was also made among extracts of sarcoplasmic, myofibrillar, SDS-soluble, and urea-soluble proteins. Protein bands of lower molecular weight showed the species-specific characteristics. Double staining better discriminated the protein banding patterns of different puffer species than Coomassie blue staining. Species identification of all tested puffers could be achieved by judging from the SDS-PAGE patterns of the 4 protein extracts stained with both stains along with protein band densities.     

Two-level optimal output feedback stabilizer design

The paper addresses the design of two-level power system stabilizers using an optimal reduced order model whose state variables are torque angles and speeds. The reduced order model retains their physical meaning and is used to design a two-level linear feedback controller that takes into account the realities and constraints of electrical power systems. The two-level control strategy is used, and a global control signal is generated from the output variables to minimize the effect of interactions. The effectiveness of this controller is evaluated and a multimachine system is given as an example to illustrate the advantages of the proposed method. Responses of the system with a two-level scheme and an optimal reduced order scheme are included for comparative analysis.     

Degradation of junction leakage in devices subjected to gateoxidation in nitrous oxide [MOS transistors]

Nitrided gate oxides offer several electrical and reliability advantages over conventional oxides and also provide a good barrier against impurity diffusion. Oxidation in nitrous oxide (N₂O) has been very successful in overcoming some of the problems associated with nitridation in ammonia. The authors have observed that the extent of N₂O oxidation has a strong detrimental effect on the drain leakage current of MOS transistors in the off state. This phenomenon has been identified to be caused by an increase in the active area junction leakage current     

Multi-H phase-coded modulations with asymmetric modulationindexes

Multi-H phase-coded modulation (MHPM) is a bandwidth-efficient modulation scheme which offers substantial coding gain over conventional digital modulation schemes. MHPM with asymmetric modulation indices corresponding to the bipolar data +1 and -1 is considered, and numerical results for the minimum Euclidean distances are provided. It is shown that performance improvements on the error probability over conventional MHPM are gained with essentially the same bandwidth and a very slight modification in implementation. The upper bounds on the error probabilities as functions of observation intervals and received E_b/N₀ are also investigated in detail. It is concluded that the concept of asymmetric modulation indices for MHPM is attractive for bandwidth and power-efficient modulation     

Patient thermal comfort requirement for hospital environments in Taiwan

This study examines the comfort criteria of ASHRAE Standard 55-2004 for their applicability in hospital environments. Through an extensive field survey conducted in a university hospital in Taiwan, 927 sets of data have been collected. Above half of the measured samples failed to meet the specifications of Standard 55 comfort zone due to improper humidity control. Acceptability votes by patients exceeded the Standard's 80% criterion, regardless of whether the physical conditions were in or out of the comfort zone. Thermal neutrality, preference and comfort range are compared with other studies conducted in office environments and Standard 55 criteria. Results of chi-square tests revealed that patients’ physical strength significantly effected their thermal requirements. The net effect of health yields a marked difference in thermal neutrality and preference, and also in the comfortable temperature range.     

Characteristics of gas-liquid chromatography

The effects of sample size, liquid loading, particle size, column length, and column temperature on retention volumes were studied and separation factor, column efficiency, partition coefficient, and heat of solution were also obtained by gas-liquid chromatography. The feed materials were chosen by similar boiling points as diethylether, dimethoxymethane and dichloromethane. The relations between retention volume and above mentioned various variables were obtained. Separation factor was more affected by column temperature than other variables, and decreased with the temperature. HETP increased almost linearly with sample size. From the exponential relationship between partition coefficient and column temperature heat of solution of each material was calculated.     

A Web‐based and Group Learning Environment for Introductory Environmental Engineering

The use of computer‐based technology is becoming more prevalent in the classroom. As a part of an educational research project sponsored by the GE Foundation, strategies for augmenting a course, Introduction to Environmental Engineering (CE 280), were investigated including cross‐disciplinary experiences in teamwork, design, and the use of advanced teaching technologies such as the web. Interactive tools to assist student learning were developed and refined. Efforts have focused on developing an extensive website, web‐based quizzes and homework assignments, and tutorials. Base groups were used to provide both intellectual and emotional support to students. This paper summarizes the development of this course and the impact of rapid feedback on the progression of student understanding.     

On the influence of N on residual microstrain in cryomilled Ni

The factors that influence the development of residual microstrain during milling in a liquid nitrogen atmosphere, defined hereafter as cryomilling, are investigated. The residual microstrains in cryomilled Ni, processed under various cryomilling conditions, were examined by X-ray diffraction (XRD) and analyzed through the single line approximation (SLA) method. The average residual microstrains are determined to be in the range of 2×10⁻³ to 6×10⁻³. The residual microstrain on the (200) plane is higher than those on the other planes by 33 pct. The residual microstrain and its anisotropy in Ni are reduced after heat treatment at 800 °C for 1 hour. The measured microstrain is proposed to evolve from the presence of N and O as impurity atoms in the Ni lattice. Both N and O are introduced from the environment and then their solubility in Ni is enriched via the generation of defects that occurs during cryomilling. The stable site for N and O atoms in Ni is the octahedral site, and the sizes of N and O atoms exceed those of the octahedral site of Ni by 48 and 16 pct respectively. Accordingly, a lattice strain field is expected around interstitial N atoms that are located at octahedral sites. By comparing the crystal structure around the octahedral site, the stable site for impurity N atoms, in the Ni lattice with that of Ni₃N structure, the lattice strains are estimated to be in the range of 5 to 15 pct. The result shows that the (200) plane has strains that are 2 times higher than those in other planes, and this is argued to be the reason for the measured anisotropy of residual strain in Ni after cryomilling.     

I-WAP: an intelligent WAP site management system

The popularity regarding wireless communications is such that more and more WAP sites have been developed with wireless markup language (WML). Meanwhile, to translate hypertext markup language (HTML) pages into proper WML ones becomes imperative since it is difficult for WAP users to read most contents designed for PC users via their mobile phone screens. However, for those sites that have been maintained with hypertext markup language (HTML), considerable time and manpower costs will be incurred to rebuild them with WML. In this paper, we propose an intelligent WAP site management system to cope with these problems. With the help of the intelligent management system, the original contents of HTML Web sites can be automatically translated to proper WAP content in an efficient way. As a consequence, the costs associated with maintaining WAP sites could be significantly reduced. The management system also allows the system manager to define the relevance of numerals and keywords for removing unimportant or meaningless contents. The original contents will be reduced and reorganized to fit the size of mobile phone screens, thus reducing the communication cost and enhancing readability. Numerical results gained through various experiments have evinced the effective performance of the WAP management system.